[groove]

I'm glad that you're reading through the book that I had mentioned. I would treat the AP that is "broadcasting two mac addresses" as two seperate AP's. So, try to capture a different handshake for each one. I hate to be negative, but I want you to keep in mind that you're probably not going to crack a WPA protected AP(unless this AP is 'reaverable'). Does this mean you shouldn't try? Absolutely not... Give it a shot. You never know. What I recommend for you:

-Set up your own AP using WPA

-Set the password to a common word. For example, dog, cat, television, rooftop. Any of these will do.

-Use the tactics you've learned from the reading to capture and crack a handshake using the rockyou.txt dictionary. This dictionary comes with backtrack and can be found elsewhere online.

-Don't forget to change the authentication password for your AP back normal.

If you are unable to complete the previous tasks then you may be doing something wrong. If you are successful then you know that your doing it right. After success you can take your skills on the road. Good luck and get back to me.

groove

[groove]

I'm glad that you're reading through the book that I had mentioned. I would treat the AP that is "broadcasting two mac addresses" as two seperate AP's. So, try to capture a different handshake for each one. I hate to be negative, but I want you to keep in mind that you're probably not going to crack a WPA protected AP(unless this AP is 'reaverable'). Does this mean you shouldn't try? Absolutely not... Give it a shot. You never know. What I recommend for you:

-Set up your own AP using WPA

-Set the password to a common word. For example, dog, cat, television, rooftop. Any of these will do.

-Use the tactics you've learned from the reading to capture and crack a handshake using the rockyou.txt dictionary. This dictionary comes with backtrack and can be found elsewhere online.

-Don't forget to change the authentication password for your AP back normal.

If you are unable to complete the previous tasks then you may be doing something wrong. If you are successful then you know that your doing it right. After success you can take your skills on the road. Good luck and get back to me.

groove

[Boxingfan]

What is the best way to begin learning how to hack WiFi?

[Boxingfan]

What is the best way to begin learning how to hack WiFi?

[Boxingfan]

What is the best way to begin learning how to hack WiFi?

[DarkZone]

scan for wps networks , wash -i mon0
if you find wps locked = no

then u can crack it easily with :
reaver -i mon0 -b "BSSID HERE" -vv

:3

[DarkZone]

scan for wps networks , wash -i mon0
if you find wps locked = no

then u can crack it easily with :
reaver -i mon0 -b "BSSID HERE" -vv

:3

[DestructoSphere]

the reason you see multiple similar bssids is that there are multiple aps. the first 3 sections of number is the manufacturer id so it would seem they are same make and model probably purchased at the same time.

[DestructoSphere]

the reason you see multiple similar bssids is that there are multiple aps. the first 3 sections of number is the manufacturer id so it would seem they are same make and model probably purchased at the same time.

[tas_ok]

i have many wifi network near my home .. some are hidden , one is wps protected, some are wpa and wpa2 protected and one is wep protected

i have problem in hacking all these .. i was unable to crack even one

my first question how hack hidden network which are open and mac filtering enabled ??
second question how hack those hidden network which broadcast two different bssid ... last two values of mac is changed ?
wat is the best way brute force wpa and wpa2 passsword... i have handshake but unable to crack it ... ...

You must read a lot mate...It is better to give you a book to read from give you the answer!

The man (Vivek Ramachandran) is the best!Buy this book and you will not regret.
http://www.amazon.com/BackTrack-Wireless...1849515581