[slbmeh]

I was sorting through some very old tape backups and putting them all on disc and came across this text file from a BBS way back when.

Some old school wire tapping tricks. Worked great to catch DTMF tones to decode and have people's phone pin codes.

Automatic Phone Recorder

by

Atomic Punk

May 1, 1989

This device will allow any standard cassette tape recorder the
ability to automatically record phone conversations. The device
will start the tape recorder when the phone handset is lifted and
stop the recorder when the handset is returned to the cradle.

The device is a DC switch that is normally on via the forward
biasing of Q1 via R3. Q1 now clamps Q2 into a forward state by
biasing its complement well into a saturated state via R4. The
DC switch is turned off via a negative voltage above that of the
Zener (D1). This voltage is usually about 48 volts and is the on
hook value of the phone line. This negative voltage over rides
the effect of R3 and keeps the circuit off. When the phone is
off the hook, the 48 volts drops to 10 volts, which is below the
zener voltage of D1, and R3 now turns the circuit on. Audio
signal is via attenuator resistor R1 and DC isolating capacitors
C1 and C2.

This device is really only a high impedance switch that isolates
the recording controlled device from the phone line via some
simple electronic circuitry. It requires no battery and obtains
power for operating from the remote jack that in most recorders
is a source of 6 volts. When the remote jack is grounded,
recorder operation starts, and when the grounding condition is
removed, recorder operation stops.

Parts list: Here's all you need:

Name Qty Description
R4 1 220 ohm 1/4 watt resistor
R3 1 39k ohm 1/4 watt resistor
R1 & R2 2 100k ohm 1/4 watt resistor
C1 & C2 2 0.01 mfd/ 50V disc cap.
Q2 1 PN2222 NPN Silicon
Q1 1 PN2907 NPN Silicon
Z1 1 15 volt Zener diode
P1 1 Sub-mini plug 2.5mm dia.
CL1 & CL2 2 Alligator clips
P2 1 Mini-Plug 3.5mm dia.
Enclosure 1 Suitable enclosure for device
PB1 1 1.25x1.67 perfboard
WR4 (18") #24 hook-up black wire
WR3 (18") #24 hook-up red wire
Casto Castolite or paraffin wax

Circuit Diagram

Code:

Red wire ----------|---------Z1--------|--------------------|--------|---------- | | | | Green | | | | -----| | | | | | | | | | | | | e | | | | | | | | R3 |-----R4---b-Q2 |---P1 | | *No connection* | | | |To remote | | | c c |of | *|* | | | |recorder |--- | ------------------|-----b-Q1 | | | | | | | | | e | | | | |------------|--------| | | | | C1 | |----------------------------3 3-----------------| | | | |---P2 | C2 |To Aux |--------------R1-----------------3 3-----------------|on Recorder

** Green and Red wires go to corresponding color of telephone wires.
** Make sure to connect Q1 and Q2 properly -- follow label c,b,e
with the wires facing toward you and flat side up.
- c is the located on the upper right hand side
- b is the next wire left of c
- e is the next wire left of b

Anyway that concludes this circuit. Now you'll be able to
monitor your phone line, and hear what goes on while you not
around.

**** Coming soon ******
How to safely build waterproof M-80s.

----------------------------------------------------------------------------
Please don't send requests for reposts, missing parts, GIFs, FTP sites,
technical advice, codes, etc. If you find getting text files from this
newsgroup inconvenient, the archive is available on disk. Send a blank email
to hplist@f26.n340.z1.fidonet.org for more information. Authors wishing to
have files added to or removed from the THC Public archive should contact
me at: tommy@f26.n340.z1.fidonet.org.
Please help keep clutter to a minimum - refer comments to e-mail. Thank you.

-=( Tommy )=-


--
/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\
-=- CandyMan -=-
http://www.mcs.net/~candyman/
candyman@mcs.com

"If in other lands the press and books and literature of all kinds are
censored, we must redouble our efforts here to keep them free."
-- Franklin Delano Roosevelt
/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\