+- Sinisterly (https://sinister.ly)
+-- Forum: Hacking (https://sinister.ly/Forum-Hacking)
+--- Forum: Tutorials (https://sinister.ly/Forum-Tutorials)
+--- Thread: Basics Of Hacking (Part 3) (/Thread-Basics-Of-Hacking-Part-3)
Basics Of Hacking (Part 3) - NgativeZero - 09-17-2011
Hey, I'm back, but this is the final thread for a while, now we're going to use what we learned in the previous 2 threads to hack a computer.
now asuming you have all the items in the 1st thread, and you've downloaded all the programs in thread 2, (except Sub7 and a virus), We'll be able to follow these steps:
1: Go to a place with an internet connection such as a Library or a coffeshop.
2: Open Cain & Abel
3: Click "configure" at the top bar
4: In the "sniffer" tab click the adapter which is connected to the network to be sniffed, then click "apply" then "OK"
5: Click the "sniffer" tab in the main window
6: Click the "network" card in the top bar (2nd from the left)
7: Click the "+" tab in the top bar
8: Select "all hosts in my subnet" then click "OK" (Entries should appear in the main window under "IP address", "MAC Address", and "OUI Fingerprint")
9: Click the top right pane in the main window, Click the "+" button in the top bar
10: Click on the router in the left pane Highlight the IP address to sniff the right pane. Click "OK"
11: Click the "ARP" icon in the top bar (3rd icon from the left)
12: Wait for other users to log into websites on their computers, this proccess could take minutes, maybe hours.
13: After some time has passed, click "Passwords" in the botton tab.
14: in the left pane, select the bolded entries, the right pane should show the Time, Server, Username, Password, And site accessed (all in plain text.)
15: Use CMD and type "Ping (IP address of computer you want to hack)" without the quotations
16: If you get responses, it means the computer is availible to hack.
17: Next type "netstat -b (IP address of the victim's computer) and this should give you the port information needed for getting into the computer.
18: Next use telnet and type "open" and press enter.
19: Then type the port of the computer you want to hack.
20: Now wait a while, and you should be in.
(This is as far as I have gotten, correct me if I'm wrong, and fill me in with what to do next, or if I've done this all wrong.)
thx for listening people.
RE: Basics Of Hacking (Part 3) - HrDe - 09-24-2011
goodd workkkkkkkkkkkkkkkk for nooobbbbbbbbbbbbbbbb
RE: Basics Of Hacking (Part 3) - DarkWater - 09-27-2011
Thank you for your "post" and the time spent...It is very clear...!
RE: Basics Of Hacking (Part 3) - gglengary - 09-29-2011
can i ask were can i find cane and abel program
that has no virus? nice tutorial by the way but i not done reading yet
cause i don't have the program...