This tutorial will show you how to mod your Xbox 360 fan to run at the full 12volts to keep your console cool! Also this tutorial is noob friendly and is very easy to do! This tutorial is for phat and slim consoles! So Trinity, Opus, Jasper, Falcon, Zypher, Xenon!

Tools Needed

Spoiler:

1. Kit to Open your Xbox (Torx T8,10)
2. Extra Wire
3. Wire Cutters

---

Videos To Help You

How to disassemble your Xbox 360

Spoiler:

http://www.youtube.com/watch?v=hPuf8KXAK88

How to assemble your Xbox 360

Spoiler:

http://www.youtube.com/watch?v=H5CyowfazOY

How to perform the mod!

Spoiler:

http://www.youtube.com/watch?v=EASAn_rhINA

---

Step 1: Take apart the console! Which I have a link to a video above!
Step 2: Cut the red and the brown wire that is connected to the fan and then strip the 2 wires!
Step 3: Twist the red and the brown wires together so they make a good connection!
Step 4: Now cut the bottom right cord that is used to power the disc tray in the middle! (Watch the video if your stuck!)
Step 5: Strip the wires and then twist them together so they make a good connection!
Step 6: Use the extra wire and tie it together to the stripped wire of the fan on one end and the the other to the disc tray cord!
Step 7: Plug everything in so it works and test it! ( Make sure the exposed wires aren't touching anything!)