RE: Wifi Hacking noob question 07-08-2022, 05:52 PM
#6
This is the most straight forward directions I could find.. Its for virtualbox... VMware is a bit different but same jam.. Parallels is a bit of a mission but also doable... Try dragonOS on a Pi4... ezpz straight out of the box
If you are using a laptop that has both EthLan and WLan and are using wifi connection or Lan connection, I would advise you to configure your vm with 2 Adapters in the Network section.
1. check from your device manager which one is your wlan and which one is your eth lan device name.
2. configuring adapter 1 with the wlan device setting, select attached to Bridged Adapter, name: select your wlan adapter name (that you found from your device manager)
3. advanced settings under it... leave adapter type as the default one shown, promiscuous deny, and more importantly, make sure the checkbox is checked for Cable connected (yes even if you selected the wlan)
4. configure your eth lan in the adapter 2 if you want.
If you are using a laptop that has both EthLan and WLan and are using wifi connection or Lan connection, I would advise you to configure your vm with 2 Adapters in the Network section.
1. check from your device manager which one is your wlan and which one is your eth lan device name.
2. configuring adapter 1 with the wlan device setting, select attached to Bridged Adapter, name: select your wlan adapter name (that you found from your device manager)
3. advanced settings under it... leave adapter type as the default one shown, promiscuous deny, and more importantly, make sure the checkbox is checked for Cable connected (yes even if you selected the wlan)
4. configure your eth lan in the adapter 2 if you want.
![[+]](https://sinister.ly/images/modern/collapse_collapsed.png)