[Reaper]

you will need A
Jtag/rgh
USB
flash 360
XeBuild 2.01

step 1
1. Boot Your Jtag/RGH into XeLL(Press Eject)
2. Wait a few seconds
3. You will see your CPU Key
4. Write Your CPU Key on a piece or paper or a notepad document or you can take a picture and keep as a backup

step2
1. Plug Your USB into your computer
2. Put Flash360 onto your USB
3. Plug Your USB Into your Jtag/RGH
4. Goto XeXMenu or freestyle dashs file manager > USB > Flash360 Folder > Flash360.XEX
5. When Flash360 Starts Press 'X' Then 'A'
6. When it gets to 100% Press 'BACK'
7. Remove Your USB From JTAG/RGH Then Plug it Back Into your computer

step 3
1. Open XeBuild
2. Press Open > Find Your USB > Flash360 Folder > flashdmp.bin
3. Press Save > Find Your USB > Flash360 Folder > Name it: updflash.bin
4. Now Add Your CPU Key Where It Says CPU Key
5. Change The 'Kernel Version' To The dashboard/Kernel you would like
6. Click 'Generate Hacked image'

step 4
1. Plus USB Back Into JTAG/RGH
2. Goto XeXMenu or freestyle dashs file manager > USB > Flash360 Folder > Flash360.XEX
3. Press 'A' > 'A' > 'Start' > 'A'
4. When Finished Press 'Back'
5. Restart JTAG/RGH
6. Wait 30 Seconds
7. Turn JTAG/RGH Back ON

step 5
NOW THAT YOUV UPDATED ITS ALWAYS A GOOD IDEA TO KEEP YOUR NAND AND CPU KEY BACKED UP
far to many people have problems they cant fix because they dont have there cpu key that key can be the diffrence between your xbox going in the bucket or being fixed (always back up your cpu/nand) then back up again to be safe you can never have to many copys
good ways to do this are
Email you could email yourself your keys and your nand and they willl always be safe(probably best way)
CD/DVD you can backup on cd or dvd good method but disks get scratched so remember to keep somewhere safe
keep on a harddrive on your pc this is ok but if it aint on an external and you need to format your going to lose it

step 6
PROFIT you now have your jtag/rgh updated enjoy and remember the very last step ALWAYS BACK YOUR stuff UP.