[Yung Lean]

It could be, but until you test a different HDD can't know for sure it's an HDD issue in the first place.

Replaced with the HDD that I've found and seems that my HDD is really dying because the one I put in now seems to be running well no freezes nothing just a bit slower since it is quite old but I think it will do for some time till I get new Hard Drive. Quite disappointing that 1TB drive died faster than 320GB old one which I have for around 5 years now.

Also a question, I got lots of Laptop HDDs is it okay to mount them in to PC and use it as normal HDD? Just a question I was curious about.

You can. Laptop drives use SATA as well. However, make sure you have the proper mounts for the smaller form factor, as excessive vibration is bad for mechanical drives.

My case has special place for Laptop HDD as I've checked. It fitted right in and didn't move only screws needed to be screwed in.

I've put my old HDD back that was freezing and now it doesn't freeze. anymore. Been running it round 15min now and using none stop and there is no Freeze now.
I am really confused right now.
Also NO CLICKing.

[mothered]

I've put my old HDD back that was freezing and now it doesn't freeze. anymore. Been running it round 15min now and using none stop and there is no Freeze now.
I am really confused right now.
Also NO CLICKing.

15 minutes may not be long enough to determine It's functionality.

Leave It running for a day or so and perform data-Intensive tasks, a lot of I/O Read/Write operations and see how It performs.

[Yung Lean]

I've put my old HDD back that was freezing and now it doesn't freeze. anymore. Been running it round 15min now and using none stop and there is no Freeze now.
I am really confused right now.
Also NO CLICKing.

15 minutes may not be long enough to determine It's functionality.

Leave It running for a day or so and perform data-Intensive tasks, a lot of I/O Read/Write operations and see how It performs.

3 days later. Still running perfectly.. No clicks nothing works just fine.
Have no idea how it started to work properly again.

[mothered]

3 days later. Still running perfectly.. No clicks nothing works just fine.
Have no idea how it started to work properly again.

Amazing, and this Is on the very "same" PC?

If so, It was probably a loose connection and simply detaching and connecting It back, has fixed the Issue.

[Yung Lean]

3 days later. Still running perfectly.. No clicks nothing works just fine.
Have no idea how it started to work properly again.

Amazing, and this Is on the very "same" PC?

If so, It was probably a loose connection and simply detaching and connecting It back, has fixed the Issue.

Yes same PC.
Well All I did was switch around cables from power supply that connects to HDD guess that was the case then bad connection.

[mothered]

Well All I did was switch around cables from power supply that connects to HDD guess that was the case then bad connection.

It certainly seems like It was a bad/loose hardware connection.

The main thing Is, all Is up and running now.